100-150 VALID TEST BOOTCAMP & 100-150 PRACTICE EXAM QUESTIONS

100-150 Valid Test Bootcamp & 100-150 Practice Exam Questions

100-150 Valid Test Bootcamp & 100-150 Practice Exam Questions

Blog Article

Tags: 100-150 Valid Test Bootcamp, 100-150 Practice Exam Questions, Valuable 100-150 Feedback, 100-150 Test Questions Fee, New 100-150 Exam Testking

Our third format is the desktop practice 100-150 exam software which can be used easily after installing it on your Windows laptop and computers. These formats are there so that applicants with different study styles can use them to attempt the Cisco Certified Support Technician (CCST) Networking (100-150) PRACTICE QUESTIONS successfully. The practice material of PrepAwayETE can be instantly accessed just after purchasing it.

Our exam questions just need students to spend 20 to 30 hours practicing on the platform which provides simulation problems, can let them have the confidence to pass the 100-150 exam, so little time great convenience for some workers. It must be your best tool to pass your exam and achieve your target. We provide free download and tryout before your purchase and if you fail in the exam we will refund you in full immediately at one time. Purchasing our 100-150 Guide Torrent can help you pass the exam and it costs little time and energy.

>> 100-150 Valid Test Bootcamp <<

100-150 Practice Exam Questions | Valuable 100-150 Feedback

To maintain relevancy and top standard of Cisco 100-150 exam questions, the PrepAwayETE has hired a team of experienced and qualified Cisco 100-150 exam trainers. They work together and check every 100-150 exam practice test question thoroughly and ensure the top standard of 100-150 Exam Questions all the time. So you do not need to worry about the relevancy and top standard of Cisco 100-150 exam practice test questions.

Cisco Certified Support Technician (CCST) Networking Sample Questions (Q26-Q31):

NEW QUESTION # 26
Examine the following output:

Which two conclusions can you make from the output of the tracert command? Note: You will receive partial credit for each correct answer. (Choose 2.)

  • A. The IPv6 address associated with the www.cisco.com server is 2600:1408: c400: 38d: : b33.
  • B. The trace failed after the fourth hop.
  • C. The routers at hops 5 and 6 are offline.
  • D. The device sending the trace has IPv6 address 2600:1408:c400:38d :: b33.
  • E. The trace successfully reached the www.cisco.com server.

Answer: A,E

Explanation:
* Statement A: "The trace successfully reached the www.cisco.com server." This is true as indicated by the "Trace complete" message at the end, showing that the trace has reached its destination.
* Statement C: "The IPv6 address associated with the www.cisco.com server is
2600:1408:c400:38d::b33." This is true because the final hop in the trace, which is the destination, has this IPv6 address.
* Statement B: "The trace failed after the fourth hop." This is incorrect as the trace continues beyond the fourth hop, despite some intermediate timeouts.
* Statement D: "The routers at hops 5 and 6 are offline." This is not necessarily true. The routers might be configured to not respond to traceroute requests.
* Statement E: "The device sending the trace has IPv6 address 2600:1408:c400:38d::b33." This is incorrect; this address belongs to the destination server, not the sender.
Reference: * Understanding Traceroute: Traceroute Guide


NEW QUESTION # 27
What is the purpose of assigning an IP address to the management VLAN interface on a Layer 2 switch?

  • A. To enable the switch to provide DHCP services to other switches in the network
  • B. To enable the switch to resolve URLs for the attached the devices
  • C. To enable the switch to act as a default gateway for the attached devices
  • D. To enable access to the CLI on the switch through Telnet or SSH

Answer: D

Explanation:
The primary purpose of assigning an IP address to the management VLAN interface on a Layer 2 switch is to facilitate remote management of the switch. By configuring an IP address on the management VLAN, network administrators can access the switch's Command Line Interface (CLI) remotely using protocols such as Telnet or Secure Shell (SSH). This allows for convenient configuration changes, monitoring, and troubleshooting without needing physical access to the switch1.
Reference: =
* Understanding the Management VLAN
* Cisco - VLAN Configuration Guide
* Remote Management of Switches
Assigning an IP address to the management VLAN interface (often the VLAN 1 interface by default) on a Layer 2 switch allows network administrators to remotely manage the switch using protocols such as Telnet or SSH. This IP address does not affect the switch's ability to route traffic between VLANs but provides a means to access and configure the switch through its Command Line Interface (CLI).
* A: The switch does not act as a default gateway; this is typically a function of a Layer 3 device like a router.
* B: The switch does not resolve URLs; this is typically a function of DNS servers.
* C: The switch can relay DHCP requests but does not typically provide DHCP services itself; this is usually done by a dedicated DHCP server or router.
Thus, the correct answer is D. To enable access to the CLI on the switch through Telnet or SSH.
Reference: =
* Cisco VLAN Management Overview
* Cisco Catalyst Switch Management


NEW QUESTION # 28
HOTSPOT
An app on a user's computer is having problems downloading data.
The app uses the following URL to download data: https://www.companypro.net:7100/api
You need to use Wireshark to capture packets sent to and received from that URL.
Which Wireshark filter options would you use to filter the results? Complete the command by selecting the correct option from each drop-down list.
Note: You will receive partial credit for each correct selection.

Answer:

Explanation:

Explanation:
To capture packets sent to and received from the URL https://www.companypro.net:7100/api using
Wireshark, you would use the following filter options:
Protocol: tcp
Filter Type: port
Port Number: 7100
This filter setup in Wireshark will display all TCP packets that are sent to or received from port 7100, which is the port specified in the URL for the API service. Since HTTPS typically uses TCP as the transport layer protocol, filtering by TCP and the specific port number will help isolate the relevant packets for troubleshooting the app's data download issues.
tcp: The app is using HTTPS, which relies on the TCP protocol for communication.
port: The specific port number used by the application, which in this case is 7100.
7100: This is the port specified in the URL (https://www.companypro.net:7100/api).
This filter will capture all TCP traffic on port 7100, allowing you to analyze the packets related to the application's data download.
Reference: Wireshark Filters: Wireshark Display Filters


NEW QUESTION # 29
Which two statements are true about the IPv4 address of the default gateway configured on a host? Note: You will receive partial credit for each correct selection. (Choose 2.)

  • A. Hosts learn the default gateway IPv4 address through router advertisement messages.
  • B. The default gateway is the Loopback0 interface IPv4 address of the router connected to the same local network as the host.
  • C. The default gateway is the IPv4 address of the router interface connected to the same local network as the host.
  • D. The IPv4 address of the default gateway must be the first host address in the subnet.
  • E. The same default gateway IPv4 address is configured on each host on the local network.

Answer: C,E

Explanation:
* Statement B: "The same default gateway IPv4 address is configured on each host on the local network." This is true because all hosts on the same local network (subnet) use the same default gateway IP address to send packets destined for other networks.
* Statement D: "The default gateway is the IPv4 address of the router interface connected to the same local network as the host." This is true because the default gateway is the IP address of the router's interface that is directly connected to the local network.
* Statement A: "The IPv4 address of the default gateway must be the first host address in the subnet." This is not necessarily true. The default gateway can be any address within the subnet range.
* Statement C: "The default gateway is the Loopback0 interface IPv4 address of the router connected to the same local network as the host." This is not true; the default gateway is the IP address of the router's physical or logical interface connected to the local network.
* Statement E: "Hosts learn the default gateway IPv4 address through router advertisement messages." This is generally true for IPv6 with Router Advertisement (RA) messages, but not typically how IPv4 hosts learn the default gateway address.
Reference: * Cisco Default Gateway Configuration: Cisco Default Gateway


NEW QUESTION # 30
DRAG DROP
Move each protocol from the list on the left to its correct example on the right.

Answer:

Explanation:

Explanation:
The correct matching of the protocols to their examples is as follows:
DHCP: Assign the reserved IP address 10.10.10.200 to a web server at your company.
DNS: Perform a query to translate companypro.net to an IP address.
ICMP: Perform a ping to ensure that a server is responding to network connections.
Here's how each protocol corresponds to its example:
DHCP (Dynamic Host Configuration Protocol) is used to assign IP addresses to devices on a network.
In this case, DHCP would be used to assign the reserved IP address 10.10.10.200 to a web server.
DNS (Domain Name System) is used to translate domain names into IP addresses. Therefore, to translate companypro.net to an IP address, DNS would be utilized.
ICMP (Internet Control Message Protocol) is used for sending error messages and operational information indicating success or failure when communicating with another IP address. An example of this is using the ping command to check if a server is responding to network connections.
These protocols are essential for the smooth operation of networks and the internet.
Perform a query to translate companypro.net to an IP address.
DNS (Domain Name System): DNS is used to resolve domain names to IP addresses.
Assign the reserved IP address 10.10.10.200 to a web server at your company.
DHCP (Dynamic Host Configuration Protocol): DHCP is used to assign IP addresses to devices on a network.
Perform a ping to ensure that a server is responding to network connections.
ICMP (Internet Control Message Protocol): ICMP is used by network devices to send error messages and operational information, and it is the protocol used by the ping command.
DNS (Domain Name System): DNS translates human-friendly domain names like "companypro.net" into IP addresses that computers use to identify each other on the network.
DHCP (Dynamic Host Configuration Protocol): DHCP automatically assigns IP addresses to devices on a network, ensuring that no two devices have the same IP address.
ICMP (Internet Control Message Protocol): ICMP is used for diagnostic or control purposes, and the ping command uses ICMP to test the reachability of a host on an IP network.
Reference: DNS Basics: What is DNS?
DHCP Overview: What is DHCP?
ICMP and Ping: Understanding ICMP


NEW QUESTION # 31
......

Our 100-150 study dumps are suitable for you whichever level you are in right now. Whether you are in entry-level position or experienced exam candidates who have tried the exam before, this is the perfect chance to give a shot. High quality and high accuracy 100-150 real materials like ours can give you confidence and reliable backup to get the certificate smoothly because our experts have extracted the most frequent-tested points for your reference, because they are proficient in this exam who are dedicated in this area over ten years. If you make up your mind of our 100-150 Exam Questions after browsing the free demos, we will staunchly support your review and give you a comfortable and efficient purchase experience this time.

100-150 Practice Exam Questions: https://www.prepawayete.com/Cisco/100-150-practice-exam-dumps.html

Cisco 100-150 study guide and 100-150 exam simulate have three versions: the PDF version, the software version and the online version, which can meet your needs during your exam preparation, It is obvious that everyone expects to get a desired job and promotion as well as a big pay raise in his or her career (100-150 learning materials), PrepAwayETE is aware that preparing with outdated Cisco Certified Support Technician (CCST) Networking (100-150) study material results in a loss of time and money.

Java programming is intimately involved with object-oriented software development, You can make regularly plans to achieve your success effectively because our 100-150 exam torrent is effective.

Unparalleled 100-150 Valid Test Bootcamp | Easy To Study and Pass Exam at first attempt & Fantastic 100-150: Cisco Certified Support Technician (CCST) Networking

Cisco 100-150 Study Guide and 100-150 exam simulate have three versions: the PDF version, the software version and the online version, which can meet your needs during your exam preparation.

It is obvious that everyone expects to get a desired job and promotion as well as a big pay raise in his or her career (100-150 learning materials), PrepAwayETE is aware that preparing with outdated Cisco Certified Support Technician (CCST) Networking (100-150) study material results in a loss of time and money.

Here, 100-150 certification has been a hot certification many people want to get, So hurry to buy the 100-150 study question from our company.

Report this page